Pipons

[Jim Davis]

Originally Posted by Royal

Isn't the DSE905 for lack of a better word, a screwdriver clone?
Not sure what a Pure deluxe is. But the Screwdriver comes primarily with a DSE 901 connector. So, if a Pure deluxe is a 510 or a 510 clone, then a 901 to 510 adaptor would work.
With these adaptors the first number listed in most cases is for the battery connector end, the second would be for the atomizer connector.

I know there are some DSE905 users here, perhaps they can either confirm or clarify this.

Yup - the DSE905 is the Screwdriver knockoff. I have one. Mine has the 901 connector. I have the 901 to 510 and the 901 to 4081 adapters.

It's not a bad little unit for the price. Has its own protection circuit so you can use the unprotected batteries.

WARNING! - when buying replacement batteries, the positive end of the battery has to protrude. I have a couple of batteries where the positive end button is flush, and they won't make contact because of the way the battery housing is formed.

[Royal]

In Ref: to DSE-905

Originally Posted by Jim Davis

WARNING! - when buying replacement batteries, the positive end of the battery has to protrude. I have a couple of batteries where the positive end button is flush, and they won't make contact because of the way the battery housing is formed.

Good to know. This is not a problem with my Screwdrivers, they are KISS method devices, with just a spring on the positive end, and a mechanical negative switch on the bottom. (MKIIs)

I think the real problem with these Li-Ion batteries starts when people run two or more in series. When this is done, I find it best to always use protected batteries, which I do on all my devices anyway.