Making your own and developing a recipe for a taste and consistency to ones liking takes some time and trials.
Over time and many a bad batch, I learned that for me at least, it requires more than just a single flavor or additive.
Here is what I do, I use a 50/50 mix of PG/VG. I use two different real commercial grade tobacco flavorings, three different lorannoils flavorings and to adjust the PH and viscosity, I add 16 drops of a grain alcohol(190 proof everclear)/citric acid solution per every 30ml of mix. (I do not use any water in my mix.)
I mix my powdered citric acid in a 15 ml bottle, adding about 20 percent citric acid then topping off with grain alcohol. Then just cap the bottle and shake it until all the citric acid has been dissolved.
My result is a mild satisfying flavor that is as close to the taste of a real cigarette as I have ever come across. The consistency wicks very well and also produces tons of vapor for my visual satisfaction, and a good throat hit. I also find that my peronal blend has very little coloring to it, and my atomizers last a long time as it vapes much more cleaner than most or all the store bought flavored e-liquids I have tried.
For so long as I can buy unflavored high octane nicquid in bulk, I will never buy a store bought mix again. But I have enough on hand to last me at least two years, maybe longer.
Just be very careful in handling the high octane stuff and be sure to wear Personal protective equipment. And always remember to keep you supplies refrigerated and out of the sunlight or exposed to air.
Oh, and my cost to make my own comes out to around $1.00 per ounce at 15 mg/ml. 1 ounce lasts me about 10 days, so that comes out to only 10 cents per day. How's that for savings?
__________________
May your e-Cig always have one more vape left in it.
|